Mobilube 20V kit: the complete guide to colour-coded battery grease guns

In industrial maintenance, the wrong lubricant in the wrong place can be catastrophic. Bearing failures, gearbox damage, contaminated food-grade machinery, ruined hydraulic systems - all of these costly incidents share a common root cause: the absence of a clear, enforced lubrication identification system. And yet, walk into most maintenance workshops today and you will find a row of identical grey or black grease guns with handwritten labels that are either faded, missing, or simply ignored.

The Mobilube 20V kit changes that. It is not just a cordless grease gun; it is a colour-coded, digitally monitored lubrication tool designed for professionals who take reliability seriously. Available in ten distinct colours, the Mobilube 20V kit makes it impossible to confuse one lubricant for another, because each gun is visually assigned to a single product, a single application point, and a single purpose.

Mobilube 20V kit

This guide covers everything you need to know: how the technology works, why colour coding matters more than most teams realise, what the smart display tells you, and how to select the right colours for your facility.

Why lubricant cross-contamination is a bigger problem than you think

Most maintenance professionals are aware that mixing lubricants is undesirable. Fewer appreciate just how small the margin for error truly is. A contaminated grease point does not always fail immediately - it may operate normally for weeks or months before the damage becomes apparent, making it extremely difficult to trace back to the root cause.

Consider the following real-world scenarios:

1. A bearing lubricated with an incompatible grease thickener type - for example, lithium complex mixed with polyurea - will see the lubricant structure break down rapidly, leading to oil bleeding, loss of film strength, and accelerated wear.
   
   
2. A food-grade application inadvertently lubricated with a conventional mineral-based grease can result in regulatory non-compliance, product recalls, and significant reputational damage.
   
   
3. An electric motor bearing over-greased by 30% - a common consequence of guesswork rather than measured dispensing - generates excess heat, churns the lubricant, and shortens bearing life dramatically.
   
   

The ISO 18436 standard for machinery condition monitoring and the widely adopted lubrication best-practice frameworks - including the 10-Step Lubrication Reliability™ approach used by Lubretec - both emphasise lubricant identification and contamination control as foundational disciplines. Colour coding your lubrication tools is not a luxury or an aesthetic choice; it is a fundamental risk-mitigation strategy.

Introducing the Mobilube 20V kit

The Mobilube 20V kit is a professional cordless grease gun built around a 20V lithium-ion power system. It is designed to replace manual lever guns and pneumatic setups in environments where precision, portability, and speed are non-negotiable.

At its heart, the kit delivers consistent pressure and controlled flow to any standard 400 g grease cartridge - the industry-standard format used across the vast majority of European and international lubricant suppliers. The gun accepts both standard push-in cartridges and screw-type cartridges with a 52 mm diameter, giving users flexibility across their lubricant inventory.

What is included in the kit

1. Mobilube 20V colour-coded grease gun pistol
2. Smart digital display (integrated)
3. 1,000 mm flexible hose with 4-jaw coupler
4. One 20V / 2,000 mAh Li-Ion battery
5. Wide-range intelligent charger (12–240 V / 50–60 Hz)
6. Shoulder strap for extended field use
7. Robust plastic carry case

Everything required to start working immediately is in the box. There is no need for a separate compressor, no trailing hoses, and no manual effort beyond positioning the coupler and pulling the trigger.

The ten-colour system: choosing the right colour for each lubricant

The Mobilube 20V kit is available in ten distinct colours, covering product codes ME015318K0 through ME015318K9. This range has been designed to give maintenance teams enough variety to assign a unique colour to every lubricant in their inventory - from high-temperature bearing greases to open-gear compounds and food-grade synthetics.

When implementing a colour-coded lubrication programme, the goal is to create a one-to-one relationship: one colour, one lubricant, one set of application points. The colour on the gun should match the colour on the storage container, the colour on the lubrication label at the machine, and ideally the colour on the grease nipple tag or fitting label. When this system is maintained consistently, even a new or temporary technician can follow it without prior knowledge of the site’s lubricant portfolio.

How to allocate colours across your facility

There is no universally mandated colour-to-lubricant standard in European industry (the OilSafe colour identification system is the most widely referenced framework, but it remains a recommended practice rather than a regulatory requirement). The important thing is internal consistency. 

Consider the following allocation strategy:

1. Group your lubricants by category first: general-purpose greases, high-temperature greases, food-grade greases, open-gear lubricants, and specialty products.
   
   
2. Assign the most visually distinct colours - red, yellow, blue, green - to the highest-volume or highest-risk categories, where the consequences of an error are most severe.
   
   
3. Reserve a specific colour for food-grade or NSF H1 lubricants and ensure it is never used for any other product in the facility.
   
   
4. Document the colour assignments in your lubrication management system and display the colour key prominently in the lube room and on the lubrication routes.
   
   
5. With ten colours available, most facilities can accommodate their entire lubricant portfolio within a single kit range, avoiding the need for custom labelling or makeshift workarounds.
   
   

Inside the smart digital display

One of the most significant differentiators of the Mobilube 20V kit compared to conventional battery grease guns is the integrated smart digital display. Where most cordless guns offer nothing more than an on/off trigger, the Mobilube display gives the operator four critical pieces of information at a glance:

1. Battery level - so you never arrive at a machine with an empty gun
2. Grease level - indicating how much product remains in the current cartridge
3. Number of cycles - tracking how many trigger activations have been performed during the current session
4. Total amount dispensed - showing the cumulative volume of grease delivered, expressed in grams
   
   

That last metric is particularly important. One of the most common lubrication errors in industry is the wrong quantity - too much grease causes churning, heat, and seal damage; too little causes starvation, wear, and premature failure. With a display showing exactly how much has been dispensed, the technician can match the actual output to the relubrication specification on the machine label. This turns greasing from a guesswork task into a measurable, auditable activity.

For facilities working towards ISO 55001 asset management compliance or pursuing a structured reliability programme, this data-driven approach to lubrication is no longer optional - it is expected.

Battery performance and charging: built for continuous operation

The Mobilube 20V kit is powered by a 2,000 mAh lithium-ion battery that delivers enough energy for up to twelve full 400 g cartridges per charge under free-flow conditions. In practice, with the typical back-pressure encountered at real grease fittings, you can expect to comfortably complete a standard lubrication route covering 30 to 60 individual grease points on a single charge - depending on the specific pressures and volumes involved.
2,000 mAh lithium-ion battery

The wide-range charger supplied with the kit is designed for facilities operating across different power environments. It accepts input from 12 V DC (vehicle sockets) up to 240 V AC at 50–60 Hz, making it suitable for field service vehicles as well as workshop sockets. Charging performance is equally impressive:

1. 80% charge is reached in approximately 30 minutes - enough to return a depleted gun to productive service during a short break
2. Full charge is achieved in approximately 60 minutes
3. Built-in overload protection prevents battery degradation during charging

Battery charger

For operations where the lubrication route is extensive and downtime is not acceptable, an additional Mobilube 20V battery (ML-ME0153180BAT) and an extra charger (ML-ME0153180CHR) are available as accessories. A hot-swap battery strategy: one battery in use, one on charge, eliminates any operational interruption entirely.

Ergonomics and portability: designed for real working conditions

A professional grease gun is used in real industrial environments, often in confined spaces, at height, in extreme temperatures, or on extended walking routes. The design of the Mobilube 20V kit reflects these realities.

The 1,000 mm flexible hose is long enough to reach awkward fittings without repositioning the operator’s body, reducing the physical strain that accumulates over the course of a long lubrication shift. The 4-jaw coupler at the end of the hose snaps onto standard grease nipples firmly and releases cleanly, minimising the drips and mess that are the hallmark of poorly designed couplers.

The included shoulder strap allows the gun to be carried comfortably between application points, freeing both hands for accessing the machine. The total weight of the kit with the carry case is 7.2 kg - substantial, but appropriate for the power and capacity on offer. 

Carry case

Where the Mobilube 20V kit fits within a lubrication reliability programme

A battery-operated grease gun - however well-designed - is only as effective as the programme surrounding it. The Mobilube 20V kit is most powerful when it is part of a structured lubrication reliability framework that includes:

1. Lubricant rationalisation: reducing the number of lubricants in use to the minimum viable portfolio, which directly reduces the number of colours required
   
   
2. Lubrication mapping: documenting every lubrication point on every machine, with specified lubricant type, quantity, and interval
   
   
3. Visual workplace management: colour-coded tags, labels, and storage containers that match the colour-coded guns
   
   
4. Technician training: ensuring every person handling the guns understands the colour-coding rules and can read the digital display correctly
   
   
5. Audit and verification: periodic checks that the right gun is being used at the right point, and that the quantities dispensed match the specifications
   
   

The Lubretec 10-Step Lubrication Reliability™ approach encompasses all of these elements and provides a structured pathway for facilities moving from reactive to proactive maintenance. The Mobilube 20V kit - available in ten colours - slots directly into steps three, four, and five of that framework: lubricant storage and handling, lubricant application, and contamination control.

Technical specifications at a glance

A gun for every lubricant, a colour for every purpose

The Mobilube 20V kit is more than a productivity tool. It is an investment in the integrity of your lubrication programme. The colour-coded body eliminates human error at the point of application. The smart digital display transforms greasing from an instinctive act into a measured, recordable task. The fast-charging battery system keeps operations moving without interruption. And the availability of ten colour variants means that virtually any facility - from a compact food production line to a sprawling petrochemical plant - can build a complete, colour-consistent lubrication toolkit without compromise.

If your maintenance team is still relying on identical manual guns with faded sticky labels, the risk of lubricant cross-contamination is higher than you may realise. The Mobilube 20V kit is the practical, scalable solution.

Browse the full range on the LubeworX shop, or contact the Lubretec team directly to discuss which colours suit your lubricant portfolio and how to integrate the Mobilube 20V kit into your lubrication reliability programme.

Ready to eliminate lubricant mix-ups in your facility? Explore the Mobilube 20V kit range at lubeworx.com or get in touch at info@lubretec.com.

Product codes - ten colours available

LubeworX